Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - 2 Before You Start

MX130 S2 Upgrade and Maintenance Manual 21
2 Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter "Important information" on
page 31.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section "Documents you need at hand" on
page 28. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page 23.
Ê Ensure that all required tools are available according to section "Tools you
need at hand" on page 27.
Installing optional components
The "PRIMERGY MX130 S2 Server Operating manual" gives an introduction to
server features and provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software to prepare hardware
expansions. ServerView Suite documentation is available online at
http://manuals.ts.fujitsu.com (http://primeserver.fujitsu.com/primergy/system/ (for the
Japanese market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server. Please refer to the following ServerView Suite topics:
– Operation
– Virtualization
– Maintenance
I For the latest information on hardware options, refer to your server’s
hardware configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/micro_server/primergy_mx130
s2x.html
for the Japanese market:
http://primeserver.fujitsu.com/primergy/system/