MX130 S2 Upgrade and Maintenance Manual 107
HDDs and accessible drives
7.10.2 Preliminary steps
Before installing a 3.5-inch HDD, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Open the front cage as described in section "Opening the front cage" on
page 52.
Ê Locate the correct drive bay as described in section "Mounting order" on
page 82.
7.10.3 Removing an additional 3.5-inch HDD out of the
5.25-inch ODD/HDD bracket
Figure 46: Cabling of HDD and ODD in 5.25-inch ODD/HDD bracket
Ê Disconnect cables to the HDD.
1 Power cable connector P2 (see "Power cable T26139-Y4012-V211"
on page 239)
2 SATA cable T26139-Y4028-V153
/
0
/
0
1
2
To Next Page
Loading...
