Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Replacing the Power Cable; Required Tools; Preliminary Steps

MX130 S2 Upgrade and Maintenance Manual 239
Cables
14.3 Replacing the power cable
Figure 152: Power cable T26139-Y4012-V211
14.3.1 Required tools
● Preliminary and concluding steps: tool-less
● Replacing the power cable: tool-less
14.3.2 Preliminary steps
Before replacing the power cable, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Field Replaceable Units (FRU)
Average task duration: 10 minutes
P1
P2
P3
P4
P5
P6