Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Concluding Steps; Installing 5.25-Inch Dummy Cover; Required Tools; Preliminary Steps

110 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.10.4 Concluding steps
Perform the following procedures to complete the task:
Ê Install the 5.25-inch dummy cover as described in section "Installing 5.25-
inch dummy cover" on page 110.
Ê Follow all procedures described in section "Closing the server" on page 54.
7.11 Installing 5.25-inch dummy cover
7.11.1 Required tools
● Preliminary and concluding steps: tool-less
● Removing the dummy cover: tool-less
7.11.2 Preliminary steps
Before installing the dummy cover, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.