MX130 S2 Upgrade and Maintenance Manual 187
11 Processors
Safety notes
V CAUTION!
● Do not install unsupported processors. For further information on
supported processors, refer to section "Basic procedure" on
page 188.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● When removing or installing the processor, be careful not to touch or
bend the processor pins.
● For further information, please refer to chapter "Important
information" on page 31.
In this chapter
● "Supported processors" on page 188
● "Replacing the processor heat sink" on page 188
● "Replacing the processor" on page 191
To Next Page
Loading...
