Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Concluding Steps

MX130 S2 Upgrade and Maintenance Manual 87
HDDs and accessible drives
Figure 27: Connecting the cables
Ê Connect the two SATA connectors to the HDDs (1 and 2).
Ê Plug the cable with the green point to the upper HDD1.
For orientation there is a second green point on the other end of this cable.
Ê Connect the power connectors (3).
7.3.4 Concluding steps
Perform the following procedures to complete the task:
Ê Close the front cage as described in section "Closing the front cage" on
page 53.
Ê Follow all procedures described in section "Closing the server" on page 54.
Ê Please observe the notes on RAID rebuild in section "Performing a RAID
array rebuild" on page 67.
/
0
1
1