MX130 S2 Upgrade and Maintenance Manual 215
System board and components
12.3.3 Removing the system board
Ê Remove all cables from the system board.
Ê Remove the following components from the system board as shown in the
related sections:
– Memory modules: refer to section "Removing memory modules" on
page 184
I Ensure to take note of the memory modules’ mounting positions
for reassembly.
– Expansion cards: refer to the section "Removing expansion cards" on
page 165
I Ensure to take note of the controllers’ mounting positions and
cable connections for reassembly.
Figure 135: Detaching the system board (A)
C
C
C
C
To Next Page
Loading...
