Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Installing Slimline ODD in 5.25-Inch ODD;HDD Bracket; Required Tools; Preliminary Steps

MX130 S2 Upgrade and Maintenance Manual 121
HDDs and accessible drives
7.15 Installing slimline ODD in 5.25-inch
ODD/HDD bracket
7.15.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing a slimline ODD:
– EMEA: Torx Plus Size 6
– Japan: Philips (+) No.00 screw driver
7.15.2 Preliminary steps
Before installing a slimline ODD, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Locate the correct drive bay as described in section "Mounting order" on
page 82.
Ê Remove the dummy cover as described in section "Removing 5.25-inch
dummy cover" on page 112.