Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Installing ODD in 5.25-Inch Chassis Bay; Required Tools; Preliminary Steps

MX130 S2 Upgrade and Maintenance Manual 115
HDDs and accessible drives
7.13 Installing ODD in 5.25-inch chassis bay
7.13.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing ODD: tool-less
7.13.2 Preliminary steps
Before installing an ODD, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Locate the correct drive bay as described in section "Mounting order" on
page 82.
Ê Remove the dummy cover as described in section "Removing 5.25-inch
dummy cover" on page 112.