Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Installing Esata Cable; Required Tools; Preliminary Steps; Installing an Esata Cable (Optional for Specific Markets)

168 Upgrade and Maintenance Manual MX130 S2
Expansion cards
9.2.3 Installing eSATA cable
9.2.3.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing expansion cards: tool-less
9.2.3.2 Preliminary steps
Before installing an expansion cable, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Remove a PCI slot bracket as described in section "Removing a PCI slot
bracket" on page 162.
9.2.3.3 Installing an eSATA cable (optional for specific markets)
Ê Remove the eSATA cable from its protective packaging.
I For further instructions regarding controller settings, please refer to
the "Description - BIOS Manual D3090 / D3091".
Upgrade and Repair Units (URU)
Average hardware task duration: 5 minutes