Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Removing a 5.25-Inch Dummy Cover; MX130 S2 Upgrade and Maintenance Manual

MX130 S2 Upgrade and Maintenance Manual 113
HDDs and accessible drives
7.12.3 Removing a 5.25-inch dummy cover
Figure 52: Removing the 5.25-inch dummy cover
Ê Push the green handle backward (1) and pull the dummy cover out of its
bay (2).
V CAUTION!
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
/
0