Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Page 153

MX130 S2 Upgrade and Maintenance Manual 153
System fan
Figure 88: Position of front fan rivets A and B
Ê Make sure that both front fan rivets A and B fit the holes in the chassis fan
slots (see circles).
Figure 89: Position of all front fan rivets
Ê The two front fan rivets C and D also must fit the holes in the chassis fan
slots (see circles).
I Note that front fan rivet D is hidden (see orange circle).
A
B
A
B
D
C