220 Upgrade and Maintenance Manual MX130 S2
System board and components
Figure 140: Installing the system board (B)
Ê Secure the system board with eight screws (M3 x 4.5 mm, standard C67
screw) (see circles) beginning with the two centering bolts (C).
I Screw torque: 0.6 Nm (not applicable for the Japanese market)
Ê Verify the settings on the new system board (DIP switches, jumpers). For a
detailed description, please refer to section "Onboard settings" on page 250.
C
C
C
C
To Next Page
Loading...
