Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Page 7

MX130 S2 Upgrade and Maintenance Manual 7
Contents
7 HDDs and accessible drives . . . . . . . . . . . . . . . . . . 79
7.1 Basic procedure . . . . . . . . . . . . . . . . . . . . . . . . 81
7.2 Mounting order . . . . . . . . . . . . . . . . . . . . . . . . . 82
7.3 Installing 3.5-inch HDD in HDD1 / HDD2 chassis bay . . . . 83
7.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 83
7.3.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 83
7.3.3 Installing a 3.5-inch HDD in HDD 1/HDD 2 chassis bay . . . . . 84
7.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 87
7.4 Removing 3.5-inch HDD out of HDD1 / HDD2 chassis bay . 88
7.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 88
7.4.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 88
7.4.3 Removing a 3.5-inch HDD out of HDD 1/HDD 2 chassis bay . . 89
7.4.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 91
7.5 Installing additional 3.5-inch HDD in 3.5-inch chassis bay . 91
7.5.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 91
7.5.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 91
7.5.3 Installing an additional 3.5-inch HDD in 3.5-inch chassis bay . . 92
7.5.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 93
7.6 Removing additional 3.5-inch HDD out of
3.5-inch chassis bay . . . . . . . . . . . . . . . . . . . . . . 94
7.6.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 94
7.6.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 94
7.6.3 Removing an additional 3.5-inch HDD out of 3.5-inch chassis bay .
95
7.6.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 96
7.7 Installing additional 3.5-inch HDD in
5.25-inch dummy cover . . . . . . . . . . . . . . . . . . . . 97
7.7.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 97
7.7.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 97
7.7.3 Installing a 3.5-inch HDD in 5.25-inch dummy cover . . . . . . 98
7.7.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 100
7.8 Removing 3.5-inch HDD out of
5.25-inch dummy cover . . . . . . . . . . . . . . . . . . . . 100
7.8.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 100
7.8.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 100
7.8.3 Removing a 3.5-inch HDD out of 5.25-inch dummy cover . . . . 101
7.8.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 103