Fujitsu PRIMERGY RX1330 M5 User Manual

5.3.8 Verifying the system time settings 82
5.3.9 Viewing and clearing the System Event Log (SEL) 83
5.3.10 Updating the NIC configuration file in a Linux and VMware
environment 85
5.3.11 Resuming BitLocker functionality 86
5.3.12 Performing a RAID array rebuild 87
5.3.13 Looking for MAC/WWN/GUID and SAS addresses 88
5.3.13.1 Basic information 88
5.3.13.2 Looking for the MAC address of a LAN controller 88
5.3.13.3 Looking for the WWN address of a fibre channel controller 89
5.3.13.4 Looking for the GUID address of an infiniband or Omni-Path
controller 90
5.3.13.5 Looking for SAS addresses of SAS controllers for external
devices 90
5.3.14 Using the Chassis ID Prom Tool 91
5.3.15 Configuring LAN teaming 92
5.3.16 Switching off the ID indicator 93
5.3.17 Performing a fan test 94
6 Power supply unit (PSU)
95
6.1 Safety notes 95
6.2 Basic information 95
6.3 Standard power supply 97
6.3.1 Replacing the standard PSU 97
6.4 Redundant power supply 101
6.4.1 Installing a hot-plug PSU 101
6.4.2 Removing a hot-plug PSU 103
6.4.3 Replacing a hot-plug PSU 106
6.4.4 Replacing the power distribution board (RX1330 M5) 108
6.4.5 Replacing the power distribution board (RX1330 M5S) 113
Content
Upgrade and Maintenance Manual RX1330 M5

Fujitsu PRIMERGY RX1330 M5 Specifications

General

Processor Sockets	1
Memory	Up to 128 GB
Memory Type	DDR4
Form Factor	1U rack server
Memory Slots	4 DIMM slots
Storage	Up to 4x 3.5" or 8x 2.5" drives
RAID Support	RAID 0, 1, 5, 6, 10, 50, 60
Network	2x 1GbE LAN ports
Power Supply	800W