Fujitsu PRIMERGY TX140 S2 - Expansion Cards and Riser Card; Installing Expansion Cards; Preliminary Steps

176 Upgrade and Maintenance Manual TX140 S2
Expansion cards and backup units
9.4 Expansion cards and riser card
9.4.1 Installing expansion cards
9.4.1.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 69
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 46
Ê "Getting access to the component" on page 47
Ê "Removing the fan module" on page 151
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver