Fujitsu PRIMERGY TX140 S2 - Installing the New Accessible Drive; Concluding Steps

244 Upgrade and Maintenance Manual TX140 S2
Accessible drives
Ê If applicable, remove the defective slimline ODD from the slide-in unit.
12.4.3 Installing the new accessible drive
Ê Install the accessible drive as described in section "Installing an accessible
drive" on page 237.
12.4.4 Concluding steps
Ê "Installing the rack front cover" on page 58 (rack server) or "Installing the
front cover" on page 63 (tower server)
Ê "Reassembling" on page 58
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 68
Ê If applicable, "Verifying and configuring the backup software solution" on
page 82
Ê "Enabling BitLocker functionality" on page 90