TX140 S2
Upgrade and Maintenance Manual 261
System board and components
Destroying the defective UFM
V CAUTION!
The UFM contains customer information (e.g. IP address, license
numbers). After replacing the UFM, hand the defective UFM over to the
customer. If the customer requests disposal of the defective UFM,
proceed as follows:
Figure 167: Destroying the defective UFM
Ê Use a pair of combination pliers (1) and flat nose pliers (2) to break
the UFM in half as shown.
14.3.3.4 Concluding steps
Ê "Reassembling" on page 58
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 68
Ê "Enabling SVOM boot watchdog functionality" on page 85
Ê "Enabling BitLocker functionality" on page 90
To Next Page
Loading...
