58 Upgrade and Maintenance Manual
TX140 S2
Basic hardware procedures
4.5 Reassembling
V CAUTION!
●
Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
●
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top / side cover is removed.
●
For further safety information, please refer to chapter "Important
information" on page 31.
4.5.1 Rack model
4.5.1.1 Installing the rack front cover
Figure 14: Installing the rack front cover
Ê Fit the rack front cover on the server front (1).
Ê Carefully fold up and close the rack front cover (2).
To Next Page
Loading...
