Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

298 Upgrade and Maintenance Manual TX140 S2
Converting a tower model to a rack model
15.3 Concluding steps
Ê "Installing the top cover" on page 59
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I The document is available online at http://manuals.ts.fujitsu.com
(EMEA market) or http://jp.fujitsu.com/platform/server/primergy/manual/
(Japanese market).
Ê "Mounting the server in the rack" on page 60
Ê Reconnect all external cables.
Ê "Connecting the server to the mains" on page 67
Ê "Switching on the server" on page 68
Ê Update your server’s chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section "Using the Chassis ID
Prom Tool" on page 93.
Ê "Specifying the chassis model" on page 95
Ê "Enabling BitLocker functionality" on page 90

Fujitsu PRIMERGY TX140 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX140 S2
Category	Server
Language	English