GE 9100c - Every twenty-four (24) months

6 Installation and Maintenance
M1207026 6-5
 6. Flow control tests (Section 3.4)
 7. Pressure relief tests (Section 3.5)
 8. Vaporizer back pressure test (Section 3.8)
 9. Low-pressure leak test (Section 3.9)
 10. Airway pressure gauge accuracy check (Section 5.4)
 11. Alarm tests (Section 3.10)
 12. Breathing system tests (Section 3.11)
 13. Power failure test (Section 3.12)
 14. Electrical safety tests (Section 3.13)
6.2.2 Every twenty-
four (24) months
In addition to the 12-month requirements, replace the following parts
every 24 months. All machine and ventilator parts should be replaced
before performing the checks, tests, and calibrations.
 1. Replace the free breathing flapper valve.
 2. Replace the free breathing valve o-ring.
M1207027 004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English−default
Reproduced from the electronic master in MATRIX