3 Checkout Procedure
M1207026 3-3
3.1 Ventilator post-service checkout
After servicing the 9100c ventilator, perform the following service
mode Calibrations:
•O
2
Cell calibration
•Paw Zero
•Paw Gain
• PEEP Valve
•Flow Zero
• Inspiratory Flow Valve
• Flow Sensor Negative
• Flow Sensor Positive
Then, complete the checkout procedure for the entire machine in the
following sections.
M1207027 004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English−default
Reproduced from the electronic master in MATRIX
To Next Page
Loading...
