GE 9100c - To remove the lower access panel

9100c
9-6 M1207026
9.2.2 To remove the
lower access panel
You must remove the lower access panel to repair or replace the
transformer assembly if equipped.
1. Bleed all gas pressure from the machine (Section 9.1).
2. Ensure that all cylinder and pipeline gauges read zero before
proceeding.
3. If present, remove the inboard cylinders.
4. To remove the lower access panel, fully loosen the six screws
that hold the panel in place.
M1207027 004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English−default
Reproduced from the electronic master in MATRIX