7 Troubleshooting
M1207026 7-3
Breathing System Leak Absorber canister not installed
properly
Install canister properly.
Damaged/missing canister o-ring Check/replace o-ring.
N
2
O flow does not decrease
with O
2
flow
Defective flowmeter assembly Verify low pressure regulator calibration.
Replace flow control assembly.
Unable to begin mechanical
ventilation
No O
2
supply Check O
2
supply.
Defective Manual/Mechanical
ventilation switch
Check Manual/Mechanical ventilation switch.
Problem Possible Cause Action
M1207027 004 MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English−default
Reproduced from the electronic master in MATRIX
To Next Page
Loading...
