3-83
Chapter 3 Settings and Measurement
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
6-2. Screen settings
Make settings for functions related to screen display.
Setting Selections available
LCD brightness Bright, Middle, Dark
Screen Saver Off, 10, 30 (sec.), 1, 2, 5, 10, 30, 60 (min.)
Background Color Black, White
6-2-1. LCD brightness
Set the brightness (three stages of bright, middle, and dark) of the LCD backlight.
6-2-2. Screen Saver
Select the time (eight stages of 10 s to 60 min.) you want to specify.
The screen is switched to the Off state automatically when the non-operation state continues for a predetermined
period.
Turns off the display if not operated for some time to extend the service life of the LCD screen.
If the GL860 runs on a battery pack (B-573, option), the use of this function prolongs the drive time.
6-2-3. Background Color
Sets the background colors of the waveform display area and the digital display area.
6-3. System settings
Make settings for functions related to system operation.
Setting Selections available
Date/Time Date From 1/1/2024 to 12/31/2035
Time From 0:0:0 to 23:59:59
AC Line cycle 50Hz, 60Hz
Return to default
settings
Operation settings Restore Operation settings
Communication settings Restore Communication settings
Power On Start Disable, Enable
Warm-up time Off, 30 minutes, 1 hour, 2 hours
Key Click Sound On, Off
Demo waveform Off, Sine wave, Triangular wave, Square wave
To Next Page
Loading...
