3-114
Chapter 3 Settings and Measurement
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
3.6
List of Error Codes
If an error code is displayed on the GL860, please handle errors in reference to the table below.
Error code Description
–1 Please contact us.
1 Please contact us.
2 File not found.
The operation target is not a folder.
3 Hardware error
There is a possibility that the hardware has failed.
Please contact us.
5 There is a possibility that the internal memory or SD memory card has failed.
8 Please contact us.
9 Please contact us.
12 Please contact us.
13 It is write-protected.
Please check the write-protect switch of the SD memory card.
16 Please contact us.
17 File/folder already exists.
The error code is displayed when you create a folder with the folder name that already exists.
21 The target is not a file.
You tried to perform the file operation for a folder.
22 The path name is too long.
23 Please contact us.
24 Please contact us.
27 Please contact us.
28 Please contact us.
46 Please contact us.
88 The disk format is not supported.
90 The target directory is not empty.
100 Please contact us.
101 Please contact us.
102 Please contact us.
To Next Page
Loading...
