4-20
Chapter 4 Example of Use
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
10. FUNC function
When you press the "FUNC" key, what you can do at that time is displayed in the lower right corner of the screen.
If you have trouble with the operation, we recommend pressing the "FUNC" key.
11. CH copy function
This function allows you to copy the settings of a specified CH to any other CH.
The settings that can be copied are as follows:
•
AMP settings
•
Calculation settings
•
Trigger setting level values
•
Alarm level values and output numbers
To Next Page
Loading...
