EasyManua.ls Logo

GRAPHTEC miid LOGGER GL860 - Battery Pack B-573 (Option); Humidity Sensor B-530 (Option)

GRAPHTEC miid LOGGER GL860
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-13
Chapter 5 Specification
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
Battery Pack B-573 (Option)
Item Description
Capacity 7.2V/2875mAh
Battery type Lithium secondary battery
Running time Up to two packs can be mounted
<When LCD is ON>
Battery pack x 1 (brightness MAX): approx. 3 hours
Battery pack x 2 (brightness MIN): approx. 6 hours
<When LCD is OFF>
Battery pack x 1: approx. 5 hours
Battery pack x 2: approx. 10 hours
* 20 channel terminals, 1-sec sampling, capturing to internal memory, new battery pack, and
+25°C environment.
* The running time depends on the operating environment.
* It cannot be used for the following products and discontinued products.
GL240/GL840/GL980/GL2000
Charging method Mount in the main unit
Time required for charging Battery pack x 1: approx. 5 hours
Battery pack x 2: approx. 10 hours
Switchover in the event of a power
failure
Because the battery is used together with the AC adapter, the power supply will be switched
automatically to the battery in the event of a power failure.
* The AC adapter is the primary power source.
Operation environment Running on battery: 0 to 40°C, Battery being charged: 15 to 35°C
Other functions • When the battery is running low, the file is closed automatically.
• Remaining amount indicator
Humidity Sensor B-530 (Option)
Item Description
Allowable temperature range –25 to +80°C
Allowable humidity range 0 to 100% RH
Relative humidity measurement
accuracy
±3% RH (5 to 98% RH at 25°C)
Method Capacitance method
Relative humidity measurement
accuracy (5 to 98%)
Measurement environment Measurement accuracy
0 to 10℃ ±5% RH
10 to 20℃ ±4% RH
20 to 30℃ ±3% RH
30 to 40℃ ±4% RH
40 to 50℃ ±5% RH
50 to 60℃ ±6% RH
60 to 70℃ ±7% RH
70 to 80℃ ±8% RH
* Measurement accuracy at 60°C or more is a reference value.
Response time 15 sec. (90% response when membrane filter is installed)
Sensor output 0 to 1 VDC
External dimensions φ14 × 80 mm (excluding cable)
Cable length 3 m
Sensor power source DC +5 to +16 V
Power consumption approx. 4 mA

Table of Contents

Related product manuals