3-88
Chapter 3 Settings and Measurement
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
Selection item Description
Operation
settings
Ring capturing function Select whether to use the ring capturing function.
On: Used.
Off: Not used.
* For the ring capturing function, refer to “2-5. Ring/Relay capturing settings”.
Relay capturing function Select whether to use the relay capturing function.
On: Used.
Off: Not used.
* For the relay capturing function, refer to “2-5. Ring/Relay capturing settings”.
Backup function Select whether to use the backup function.
On: Used.
Off: Not used.
* For the backup function, refer to “2-6. Backup setting”.
Trigger function Select whether to use the trigger function.
On: Used.
Off: Not used.
* For the trigger function, refer to “3. TRIG settings”.
Alarm function Select whether to use the alarm function.
On: Used.
Off: Not used.
* For the alarm function, refer to “4. ALARM settings”.
Game Select whether to use the game.
On: Used.
Off: Not used.
* For the alarm function, refer to “6-8. Game”.
Communication
settings
I/F command function Select whether to use the I/F command function.
On: Used.
Off: Not used.
* For the trigger function, refer to “5.9. Network settings”.
FTP server function Select whether to use the FTP server function.
On: Used.
Off: Not used.
* For the trigger function, refer to “5.9. Network settings”.
WEB server function Select whether to use the WEB server function.
On: Used.
Off: Not used.
* For the trigger function, refer to “5.9. Network settings”.
•
This setting is also displayed at the first startup. If you skip the setting at the first startup, the same setting is possible
from this setting.
•
When any function is turned off, “Displaying custom menu” is displayed on the DATA menu to indicate that the function is
restricted.
To Next Page
Loading...
