3-106
Chapter 3 Settings and Measurement
Contents General Description
Checks and Preparation
Settings and Measurement
Example of Use Specification
Selection item Description
Average Displays the simple average value of the data between cursors A and B.
Max Displays the maximum value of the data between cursors A and B.
Min Displays the minimum value of the data between cursors A and B.
P-P Displays the peak to peak (P-P) value of the data between cursors A and B.
RMS Displays the RMS value of the data between cursors A and B.
The calculation formula is as follows:
* D: data n: number of data
To Next Page
Loading...
