To Next Page

To Previous Page

GEN7iB

183

INPUT CARDS

12.2.1 Measuring voltages

Impor

tant

High bandwidth and measurement cabling.

Due to the high bandwidth measurement capabilities of the acquisition card, combined with

the high measurement sensitivity of the card, it is important to pay close attention to the

measurement cabling.

Some advice to prevent measuring unwanted disturbances:

● Keep measurement cables as short as possible in order to reduce the reception of

environmental disturbances.

● Use shielded cables. The cable should have the measurement cables paired

inside a shield. Preferably, the shield should be connected to the chassis of the

measurement Genesis High Speed equipment. Alternatively, the shield could also

be connected to the chassis of the object under test.

Shielding

Measurement

cables

Fig. 12.1 Shielded cable principles

Questions and Answers:

Need help?

Do you have a question about the HBK GEN7iB GEN Series and is the answer not in the manual?

HBK GEN7iB GEN Series Specifications

General