GEN7iB
468
PTP SYNCHRONIZATION
PTP SYNCHRONIZATION
G
G PTP Synchronization
G.1 Mainframe PTP connections
GEN DAQ mainframes support two 1 Gigabit PTP ports. However, these ports can not be
used as a bridge.
GEN DAQ mainframes do not forward PTP information (or any other message/data) from
one port to the other port.
G.1.1 GEN7i
Fig. G.1 GEN7i PTP enabled ports
A PTP enabled network RJ45
B PTP enabled network optical SFP slot (SFP module is optional)