HBK GEN7iB GEN Series User Manual

GEN7iB
362
SERVICE INFORMATION
SERVICE INFORMATION
C
C.2 Calibration/verication
The GEN series Data Acquisition System is factory calibrated when delivered to the
customer. Swapping, replacing or removing the cards may result in minor deviations
to the original calibration. HBM recommends that the GEN series system should be
tested and, if necessary, calibrated once a year or after any major event that may affect
calibration. When in doubt, consult your local supplier.

HBK GEN7iB GEN Series Specifications

General

Brand	HBK
Model	GEN7iB GEN Series
Category	Measuring Instruments
Language	English