HBK GEN7iB GEN Series User Manual

GEN7iB
455
TROUBLE-SHOOTING
TROUBLE-SHOOTINGD
PoE injector LED status overview
The following tables give an overview of the LEDs' status for the PoE injector and can
be used as reference. This information is an extract from the GPS antenna’s manual,
please refer to that manual directly for more detailed information.
Status LED
The Perle PoE/PoE +10/100/1000 rate Media convertors have status LEDs located on
the front panel of the unit.
%DVH; %DVH7
)
3:5 )') /.) 63' )'&/.& 36(
&
/('V
3:5   3RZHU
)')   )LEHU'XSOH[
/.)   )LEHU/LQN
63'   &RSSHU3RUW
)'&   'XSOH[RQ&RSSHU
/.&   /LQN6WDWXVRQ&RSSHU3RUW
36(   6ROLG*UHHQ6ROLG2UDQJH
Fig. D.74 Power over Ethernet injector LEDs details
GEN series LED status PoE injector
Status LED Activity
LED
Description
PWR ON Power is applied to the unit.
Blinking (slow) Loopbackmode(oneorbothberinterfaces
are in loopback mode)
Blinking (fast) Power ON failure. See LED pattern table to
determine pattern combination and failure
cause

HBK GEN7iB GEN Series Specifications

General

Brand	HBK
Model	GEN7iB GEN Series
Category	Measuring Instruments
Language	English