3−101
Analog Output Calibration Related Functions
These functions are for adjustment of analog output FM and AM. The outputs are
adjusted at factory before the shipment, and therefore basically no need to adjust at the
customer. But in case you need to change the gain depending on your system (i.e. analog
meter specification), you can use these functions for the adjustment.
“C” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description Lnitial data Units
C105
EO gain adjustment Set range is 50 to 200%
100. %
C106
AM gain adjustment Set range is 50 to 200%
100. %
C109
AM bias adjustment Set range is 0 to 100%
0. %
To Next Page
Loading...
