Hitachi WJ200 Series User Manual

3−111
“P” Group: Other Parameters
P group parameters are for other functionality such as option error related, encoder
(pulse train input) settings related, torque command related, positioning command
related, Torque command related, EzSQ related, and communication (CompoNet,
DeviceNet, EtherNet, ProfiBus, CAN Open, and CC-Link) related.
Option Card Error
You can select how the inverter reacts when an error results from a built-in option card.
“P” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description Lnitial data Units
P001
Reaction when option
card error occurs
Two option codes:
00…Inverter trips
01…Ignores the error (Inverter
continues operation)
U
00
−

Hitachi WJ200 Series Specifications

General

Series	WJ200
Output Frequency	0.1 to 400 Hz
Control Method	V/f Control, Sensorless Vector Control
Overload Capacity	150% for 60 seconds
Enclosure	IP20
Communication	RS-485 (Modbus RTU)
Input Voltage	200-240V AC, 380-480V AC
Ambient Temperature	-10 to +50°C
Storage Temperature	-20 to +60°C
Humidity	5 to 95% RH (non-condensing)
Cooling Method	Fan cooled
Braking Unit	Built-in
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Analog Inputs	2
Analog Outputs	1