4−39
LAD Cancellation
This function is for canceling the set ramp time and changes the output speed
immediately according to the set speed. (Please refer to chapter3 for the detailed
description of the function.)
Option
Code
Terminal
Symbol
Function Name State Description
46
LAC LAD cancellation ON Disabling the set ramp time and inverter output
immediately follows the speed command.
OFF Accelerates and decelerates according to the set
ramp time
Valid for inputs:
C001~C007
Example (default input configuration shown—see
page 3–84):
See I/O specs on page 4–6.
Required settings
LAC
7654321L
PCS
P24
PLC
To Next Page
Loading...
