2−17
Terminal Dimensions and Torque Specs
The terminal screw dimensions for all WJ200 inverters are listed in table below. This
information is useful in sizing spade lug or ring lug connectors for wire terminations.
WARNING: Tighten the screws with the specified torque in the table below. Check for
any loosening of screws. Otherwise, there is the danger of fire.
Types
Screw
Diameter
Width
(mm)
Tightening Torque
(N•m)
WJ200 - 001S,002S,004S
WJ200 - 001L,002L,004L,007L
M3.5 7.6 1.0
WJ200 - 007S,015S,022S
WJ200 - 015L,022L,037L
WJ200 - 004H,007H,015H,022H,030H,040H
M4 10 1.4
WJ200 - 055L,075L
WJ200 – 055H,075H
M5 13 3.0
WJ200 - 110L
WJ200 - 110H,150H
M6 17.5 3.9 to 5.1
WJ200 - 150L M8 23 5.9 to 8.8
To Next Page
Loading...
