1−4
WJ200 Inverter Specifications
Model-specific tables for 200V and 400V class inverters
The following tables are specific to WJ200 inverters for the 200V and 400V class model
groups. Note that “General Specifications” on page in this chapter
apply to both voltage
class groups. Footnotes for all specification tables follow the table below.
Item Single-phase 200V class Specifications
WJ200 inverters, 200V models 001SF 002SF 004SF 007SF 015SF 022SF
Applicable motor size
*2
kW VT 0.2 0.4 0.55 1.1 2.2 3.0
CT 0.1 0.2 0.4 0.75 1.5 2.2
HP VT 1/4 1/2 3/4 1.5 3 4
CT 1/8 1/4 1/2 1 2 3
Rated capacity (kVA) 200V VT 0.4 0.6 1.2 2.0 3.3 4.1
CT 0.2 0.5 1.0 1.7 2.7 3.8
240V VT 0.4 0.7 1.4 2.4 3.9 4.9
CT 0.3 0.6 1.2 2.0 3.3 4.5
Rated input voltage
Single-phase: 200V-15% to 240V +10%, 50/60Hz ±5%
Rated output voltage *3 3-phase: 200 to 240V (proportional to input voltage)
Rated output current (A) VT 1.2 1.9 3.5 6.0 9.6 12.0
CT 1.0 1.6 3.0 5.0 8.0 11.0
Starting torque *6 200% at 0.5Hz
Braking Without resistor
100%:
60Hz
70%: 50Hz
≤
50%: 60Hz
≤
20%: 50Hz
≤
20%:
≤
60Hz
With resistor 150% 100%
DC braking Variable operating frequency, time, and braking force
Weight kg 1.0 1.0 1.1 1.6 1.8 1.8
lb 2.2 2.2 2.4 3.1 4.0 4.0
To Next Page
Loading...
