EasyManua.ls Logo

Hitachi WJ200 Series

Hitachi WJ200 Series
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
vi
Wiring – Cautions for Electrical Practice
CAUTION: Fasten the screws with the specified fastening torque in the table
below. Check for any loosening of screws. Otherwise, there is the danger of fire.
2-18
CAUTION: Be sure that the input voltage matches the inverter specifications;
Single phase 200V to 240V 50/60Hz (up to 2.2kW) for SFEF model
Single/Three phase 200V to 240V 50/60Hz (up to 2.2kW) for NFU model
Three phase 200V to 240V 50/60Hz (7.5kW) for LFU model
Three phase 380V to 480V 50/60Hz (up to 7.5kW) for HFx model
2-20
CAUTION: Be sure not to power a three-phase-only inverter with single phase
power. Otherwise, there is the possibility of damage to the inverter and the danger
of fire.
2-20
CAUTION: Be sure not to connect an AC power supply to the output terminals.
Otherwise, there is the possibility of damage to the inverter and the danger of
injury and/or fire.
2-20
Power Input
Output to Motor
WJ200 Inverter

Table of Contents

Other manuals for Hitachi WJ200 Series

Related product manuals