Hitachi WJ200 Series

3−103
“C” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description Lnitial data Units
C142
Logic output 1 operand A
All the programmable functions
available for logic (discrete) outputs
except LOG1 to LOG3, OPO, no
U
00
−
C143
Logic output 1 operand B
U
00
−
C144
Logic output 1 operator Applies a logic function to
calculate [LOG] output state,
Three options:
00…[LOG] = A AND B
01…[LOG] = A OR B
02…[LOG] = A XOR B
U
00
−
C145
Logic output 2 operand A
All the programmable functions
available for logic (discrete) outputs
except LOG1 to LOG3, OPO, no
U
00
−
C146
Logic output 2 operand B
U
00
−
C147
Logic output 2 operator Applies a logic function to
calculate [LOG] output state,
Three options:
00…[LOG] = A AND B
01…[LOG] = A OR B
02…[LOG] = A XOR B
U
00
−
C148
Logic output 3 operand A
All the programmable functions
available for logic (discrete) outputs
except LOG1 to LOG3, OPO, no
U
00
−
C149
Logic output 3 operand B
U
01
−
C150
Logic output 3 operator Applies a logic function to
calculate [LOG] output state,
Three options:
00…[LOG] = A AND B
01…[LOG] = A OR B
02…[LOG] = A XOR B
U
00
−
Other Functions
To avoid the miss-input of the multi-speed due to the time rug, waiting time to fix the
multi-speed can be set by C169. When input is detected, data is fixed after the time
defined with C169.