Hitachi WJ200 Series

4−88
The following table shows the available analog input settings. Parameter A005 and the
input terminal [AT] determine the External Frequency Command input terminals that
are available, and how they function. The analog inputs [O] and [OI] use terminal [L]
as the reference (signal return).
A005
[AT] Input Analog Input Configuration
00
ON [O]
OFF [OI]
02
ON [O]
OFF Integrated POT on external panel
03
ON [OI]
OFF Integrated POT on external panel
Other Analog Input-related topics:
· “Analog Input Settings”
· “Additional Analog Input Settings”
· “Analog Signal Calibration Settings”
· “Analog Input Current/Voltage Select”
· “ADD Frequency Enable”
· “Analog Input Disconnect Detect”