B−28
Register
No.
Function name
Function
code
R/W Monitoring and setting items
Data
resolution
004Eh Programming error monitoring d090 R Warning code -
004Fh to
006Ch
(reserved) - - - -
006Dh to
08Efh
(reserved) - - - -
0900h Writing to EEPROM - W
0: Motor constant recalculation
1: Save all data in EEPROM
Other: Motor constant recalculation and
save all data in EEPROM
-
0901h Unused - - Inaccessible -
0902h EEPROM write mode - W 0 (invalid) / 1 (valid)
0903h to
1000h
Unused - - Inaccessible -
Note 1: Assume that the rated current of the inverter is "1000".
Note 2: If a number not less than "1000" (100.0 seconds) is specified, the second value after the
decimal point will be ignored.
Note 3: 0902h setting is referred for one time when following 06H command is executed.
To Next Page
Loading...
