Hitachi WJ200 Series - Page 379

B−50
(vi) List of registers (2nd control settings)
Register
No.
Function name Function code R/W Monitoring and setting items
Data
resolution
2103h
Acceleration time (1),
2nd motor
F202 (high) R/W
1 to 360000
0.01 [sec.]
2104h F202 (low) R/W
2105h
Deceleration time (1),
2nd motor
F203 (high) R/W
1 to 360000
0.01 [sec.]
2106h F203 (low) R/W
2107h to
2200h
unused - - Inaccessible -
(vii) List of registers (function modes for the 2nd control settings)
Register
No.
Function name
Function
code
R/W Monitoring and setting items
Data
resolution
2201h Frequency source, 2nd motor A201 R/W
0 (keypad potentiometer), 1 (control
circuit terminal block), 2 (digital
operator), 3 (Modbus), 4 (option ), 6
(pulse train input), 7 (easy sequence),
10 (operation function result)
-
2202h Frequency source, 2nd motor A202 R/W
1 (control circuit terminal block), 2
(digital operator), 3 (Modbus), 4
(option)
-
2203h Base frequency, 2nd motor A203 R/W
300 to "maximum frequency, 2nd
motor"
0.1 [Hz]
2204h
Maximum frequency,
2nd motor
A204 R/W 300 to 4000 0.1 [Hz]
2205h to
2215h
(Reserved) - - Inaccessible -
2216h
Multispeed frequency setting,
2nd motor
A220 (high) R/W
0 or "start frequency" to "maximum
frequency, 2nd motor"
0.01 [Hz]
2217h A220 (low) R/W
2218h to
223Ah
(Reserved) - - Inaccessible -
223Bh
Torque boost method
selection, 2nd motor
A241 R/W
0 (manual torque boost), 1 (automatic
torque boost)
-
223Ch
Manual torque boost value,
2nd motor
A242 R/W 20 to 200 1 [%]
223Dh
Manual torque boost
frequency, 2nd motor
A243 R/W 0 to 255 1 [%]
223Eh
V/F characteristic curve
selection, 2nd motor
A244 R/W
0 (VC), 1 (VP), 2 (free V/f), 3
(sensorless vector control)
-
223Fh
V/f gain, 2nd motor
A245 R/W 20 to 100
1 [%]
2240h
Voltage compensation gain
setting for automatic torque
boost, 2nd motor
A246 R/W 0 to 255 1
2241h
Slippage compensation gain
setting for automatic torque
boost, 2nd motor
A247 R/W 0 to 255 1
2242h to
224Eh
(Reserved) - - Inaccessible -
224Fh
Frequency upper limit,
2nd motor
A261 (high) R/W
00 or "2nd minimum frequency limit"
to "maximum frequency, 2nd motor"
0.01 [Hz]
2250h A261 (low) R/W
2251h
Frequency lower limit,
2nd motor
A262 (high) R/W
00 or "start frequency" to "maximum
frequency, 2nd motor limit"
0.01 [Hz]
2252h A262 (low) R/W
2253h to
2268h
(Reserved) - - Inaccessible -
2269h AVR function select, 2nd motor A281 R/W
0 (always on), 1 (always off), 2 (off
during deceleration)
-
226Ah AVR voltage select, 2nd motor A282 R/W
200 V class: 0 (200)/1 (215)/2 (220)/3
(230)/4 (240)
400 V class: 5 (380)/6 (400)/7 (415)/8
(440)/9 (460)/ 10 (480)
226Bh to
226Eh
(Reserved) - - Inaccessible -