Honeywell Farenhyt IFP-2000 - Page 131

151430-L8 Programming Overview
8-22
Point
(cont.)
Internal Power and
External Power
(cont.)
Enter Pt /Select Function (cont.)
B SWITCH
ZONE AUX2
Latch and Non-Latch
feature only appear for
WATERFLOW,FIRE
SUPERVISORY, FIRE
TAMPER, ZONE AUX1,
ZONE AUX2, SYSTEM
AUX1, SYSTEM AUX2.,
ECS INPUT, ECS TAMPER,
and ECS SUPERVISORY.
SYSTEM
AUX1
SYSTEM
AUX2
MANUAL
RELEASE
INTER-LOCK
ECS INPUT
If ECS INPUT is selected
choose associated EVENT
ECS
TAMPER
Latch and Non-Latch
feature only appear for
WATERFLOW,FIRE
SUPERVISORY, FIRE
TAMPER, ZONE AUX1,
ZONE AUX2, SYSTEM
AUX1, SYSTEM AUX2.,
ECS INPUT, ECS TAMPER,
and ECS SUPERVISORY
ECS
SUPER-
VISORY
STATUS
POINT
A SWITCH Same as B SWITCH
B
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
A
DETECT
2-WIRE SMOKE
4-WIRE SMOKE
CO 4 WIRE DET
Select Group or Zone Number Group or Zone selection will
appear depending on the
function selected
Edit Name Enter Name
5880/5865/ECS-
Series Amplifiers
Enter Point #
UNUSED
Section 9.5.3
NOTIF
Select Group
Edit Name Enter Name
Menu Options/Defaults Comments