Honeywell Farenhyt IFP-2000 User Manual

Model IFP-2000/ECS Installation Manual 151430-L8
9-19
Table 9-5 Choices for Point Programming Modules
Choices Type Selections
Function Selections
for each Type
Comments
5880 (output)
UNUSED
NOTIF
(outputs pt 1-40)
NOTIF OUTPUT
CONTROL CIRCUIT
5880 (input 41-48) SWITCH
MANUAL PULL Refer to comments column of
Table 9-3 for description of these
options.
Latch or Non-latching feature only
appears for WATERFLOW, FIRE
SUPERVISORY, FIRE TAMPER, ZONE
AUX1, ZONE AUX2, SYSTEM AUX1,
SYSTEM AUX2, ECS INPUT, ECS
TAMPER, and ECS SUPERVISORY.
User also has ECS Event Number 1-8
option for ECS INPUT.
Only available when an ECS-VCM is
installed in the system.
WATERFLOW
FIRE SUPERVISORY
FIRE TAMPER
FIREDRILL
SILENCE
RESET
P.A.S. ACK
ZONE AUX1
ZONE AUX2
SYSTEM AUX1
SYSTEM AUX2
MANUAL RELEASE
INTERLOCK
STATUS POINT
ECS INPUT
ECS TAMPER
ECS SUPERVISORY
5496
UNUSED
B NOTIF NOTIF OUTPUT
CONTROL CIRCUIT
A NOTIF NOTIF OUTPUT
CONTROL CIRCUIT
AUX_PWR CONSTANT
AUX RESET
AUX DOOR
5865
UNUSED
NOTIF NOTIF OUTPUT
CONTROL CIRCUIT
ECS-AMP
UNUSED
NOTIF

Honeywell Farenhyt IFP-2000 Specifications

General

Brand	Honeywell
Model	Farenhyt IFP-2000
Category	Conference System
Language	English