Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
86
Configuring Smart Plan Settings
Smart plan is a master switch for the intelligent analytics such as Face Detection and People
Counting. The device intelligent functions can be valid after smart plan is enabled.
Go to Main Menu  SETTING  EVENT  SMART PLAN. Select a channel that you want to
apply the smart plan to and select the plan by clicking its icon and click Apply.
Figure 8-9 Smart Plan Configuration Tab
Configuring System Abnormality Event Settings
Configuring HDD Event Settings
1. Go to Main Menu  SETTING  EVENT  ABNORMALITY  HDD.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet