Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
248
Figure 15-12 Replacing the NVR Cover
8. Secure the NVR cover in place by fixing the screws in the rear panel.
Installing a HDD on HEN163*4/HEN323*4/HEN643*4
1. Loosen the screws on the rear panel of the NVR, remove the front cover, and set it aside.
Figure 15-13 Removing the NVR Cover
2. Loosen four screws on the HDD.
Figure 15-14 Loosening the Four Screws in the HDD Housing
3. Put the HDD on the HDD bracket in the chassis and then align the HDD with the four
holes in the bracket.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet