Web Client Operation
231
Playing Back Slices
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
For the large recording file, you can use the slice playback function to play the same file in
several sections at the same time. It is very convenient for you to find the video footages you
desire.
On the main window, click Playback. You will be navigated to the window as shown in Figure
12-110.
On the right pane, select Slice in the dropdown list, and then select date, cameras and stream.
The slice playback interface is shown as below. Each section has a small triangle; you can
adjust it to set time.
Figure 12-113 Slice Playback
Select slice file.
• Click Playback, system playbacks from the first of current date by default.
• Click time bar, system playbacks from the time you click.
• Click , you can select on the file list.
Note
• The slice playback is for 1-window playback mode.
• System supports 1/4/8/16-split mode. Slight difference
may be found here. The 4-channel series product supports
4-split mode. The 8-channel series product support 8-split
mode. The 16-channel or higher series product supports
16-split mode.
• The min period of each section is 5 minutes. For the record
less than 20 minutes, if you select 4-split mode (or more
than 4-split mode), system can auto adjust so that the
each section period is 5 minutes. In this situation, some
channel may have no video.
Playing Back Marks
Please make sure your purchased device support this function. You can use this function only
if you can see the mark playback icon on the Playback window (Figure 12-110).
To Next Page
Loading...
Need help?
General