Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
232
When you play back video record, you can mark the video record when there is important
information. After the playback, you can search the corresponding record by time or the mark
key words and then play it. It is very easy for you to get the important video information.
Add Mark
During the playback, click and the following window is displayed:
Figure 12-114 Add Mark
Click OK.
Playback Mark
During 1-window playback mode, click on the Playback window (Figure
12-110), you can go to mark file list interface. Double click one mark file, you can begin
playback from the mark time.
Figure 12-115 Mark List
Play before mark time
Here you can set to begin playback from previous N seconds of the mark time.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet